LSatan
LSatan
do you use the internal reception functions for reception or an interrupt that records the pulses?
Hi, yes you can switch between rx and tx in your program. it depends on how you want to send it. So automatically via a button or via serial commands....
Hi, yes it works with nodemcu esp8266. use the wiring diagram of esp8266 wemos d1 mini.  Regards
is not necessary. unless you want to use other pins.
I once read your other editions. I guess it's about the Silentron plant. if you plan to use another mod for rc-swicht it will not work. raw data modulation in...
it is difficult to say whether the system uses ask. I do not know it. if you used the sketch linked above and there was nothing, you should have seen...
You can use it to display radio signals acoustically and graphically, regardless of the modulation. between 0mhz and 1000mhz. You can use it to recognize the modulation and the frequency....
it is best to wait until the cc1101 module is there and try 430mhz. with rc switch it can also be 870mhz i don't read the document because of the...
ok then we'll stay that way for now. if you have the module there, first wire it up and use the example receive demo simple cc1101 from my library. I...
problem was solved successfully. communication via hangouts.