LSatan

which arduino do you use? I tested with nano.

ok uno and nano don't really differ. 1.8.5 shouldn't be the problem. i will carry out tests again afterwards and try to reproduce the error.

I checked everything again. and only changed a little bit. I'm fine with D2 and pullup too. Check all your connections again! Everything works fine for me. after starting: ...

I just tested it. the same result on uno!

nice that it works. I would be interested in what it was. It is important that the transmitter and receiver are a little apart. they must not be directly next...

thank you very much for the donation. Donations help to further develop the library. Since I can invest it in new hardware. To make them compatible. With your request, you...

the wiring is correct. for me the codes work as they are. you don't happen to own an sdr receiver? please try the examples of rc-switch once send demo cc1101...

That's right we have already talked about the dsun module. this is the pin assignment:  RTL-SDR USB stick with R820T2. this module is completely sufficient and it is inexpensive....

mmh that doesn't sound too good. you can both use the receiver to test whether the cc1101 is transmitting. the transmitter to test whether cc1101 is receiving. but all only...

hello, could you test it yet? to check whether the spi connection of the cc1101 is working you can use the debug tool. https://github.com/LSatan/CC1101-Debug-Service-Tool add the marked spots to your...