LSatan

description from the debug tool: cc1101_debug.setDRate(100.00); //Set Data rate from min 0.02kBaud to max 1621.83kBaud directly like SmartRF Studio. cc1101_debug.setDeviation(47.00); //Set Deviation from min 1.58khz to max 380.85khz directly like...

many new settings available in the 2.5.0 update. Regards

Hi, Good work! I recommend taking the new lib changes with you. For example, the old frequency calculator incorrectly sets some frequencies. Example I enter 444,000 MHz, it turns it...

Hi there, You may lose the connection to the first one (due to the RC switch). The settings in the CC1001 modules remain. I would suggest testing the following: https://www.taillieu.info/index.php/software/arduino-sketches/287-rf-sniffer-rx433-tx433...

at the end try to initialize rc-switch pins. ELECHOUSE_cc1101.setSpiPin(10, 11, 12, 13); ELECHOUSE_cc1101.setMHZ(433.92); ELECHOUSE_cc1101.Init(PA10); ELECHOUSE_cc1101.SetRx(); ELECHOUSE_cc1101.setSpiPin(10, 11, 12, 9); ELECHOUSE_cc1101.setMHZ(315.00); ELECHOUSE_cc1101.Init(PA10); ELECHOUSE_cc1101.SetRx(); mySwitch.enableReceive(0); //Pin D2 mySwitch.enableReceive(1) //Pin D3

assign unique names for the modules: RCSwitch rf315Switch = RCSwitch(); RCSwitch rf434Switch = RCSwitch(); and: rf315Switch.enableReceive(0); rf434Switch.enableReceive(1); I wish you success

it is a bit difficult with the esp32. the pins for sending are not necessarily the problem. with the exception of gpio 34.35 as far as I know they are...

these are my pins: sck = 14; miso = 12; mosi = 13; cc1101 / 1 gdo2 GPIO4 gdo0 GPIO2 csn = 15 cc1101 / 2 gdo2 GPIO 3 (RX)...

Hi there I will test it myself the days. I have enough modules. which cc1101 modules do you use? the dsun 8pin or the other 10pin?

Sketchfile: [test_rcswitch_dual.ino.txt](https://github.com/LSatan/RCSwitch-CC1101-Driver-Lib/files/4051890/test_rcswitch_dual.ino.txt) I have tested it. only received with 2 modules. it works well. 2 cc1101 on the esp32 and 1 cc1101 module on the arduino nano as transmitter. the...