LSatan

I do not use additional resistors or the like. after flashing on the esp32, i reset it or briefly take the current away. then it works. how far are you...

Hi there, have you got any further? I have found that something is received at both times only at one. a change in the cc register helps and it always...

yes this is theoretically possible. also depends on how many pins the microcontroller used has. Another question is whether rcswitch supports this. but with the lib you can switch between...

hi, FSCTRL1 is responsible for the following. for the calculation one should look into the data sheet: The desired IF frequency to employ in RX. Subtracted from FS base frequency...

thanks for the invitation, is there a specific reason for using 2.3? The version still has quirks in the frequency calculation. Which major construction sites are still open? You can...

the gdo_set function in init is a relic of the original elechouse bibliotehk. I should remove it from init as gdo_set is not relevant for the avoided examples. You're right....

done with v2.5.2

Hi, Thank you for your interest. I have rebuilt and improved the frequency scanner. He is now less prone to errors and works a little faster. ``` C++ #include float...

Sure... the highest rssi is worth your frequency. You can exclude the wrong frequencies with rssi threshold. check rssi_threshold = -35; you recive nothing? than test -40; you receive to...

hello, just to avoid misunderstandings. which broadcast example did you use? With the internal receive samples you can only receive the internal send examples from a 2nd cc1101 (cc1101_Transmitt_Hello_World_minimal). if...