Robert Heel

I have the same problem with two identical Bluetooth controller - two devices in the KDE settings, recognized with the same ID in higan :-(

Please check out the latest git version. Two features where added recently that may solve this issue, too: - At solar charging charge at least 40 seconds at minimum current...

The "slow start" is only active on Solar mode, because there it's most likely that the car can only charge with a low current. At Smart charging more current should...

Solar mode won't work without PV ... I've created a patch to enable the change also in Smart mode and changed the Phase detection to start 10 seconds with 6...

Hi, great thanks for the feedback! The car have to react to a decreasing current faster than to an increasing current. To avoid interference with other electricity consumer I only...

[EVSE.zip](https://github.com/SmartEVSE/SmartEVSE-2/files/9381736/EVSE.zip) This version tries to detect the charging start (0 -> 6 A), and verifies to measurement by increasing from 6 A -> 8 A. Only when this fails, it...

Untested now. The idea is to pause balancing when measuring. I fixed the bug, added two constants and changed number of identical measurements from 2 to 3... #define STARTCURRENT_MEASURE_INCREASE //...

Currently you can read the charge state only over Modbus (RS485), https://github.com/SmartEVSE/SmartEVSE-2/tree/b8b6a1a2def22a2bfc3cc30be2f2ef639e2d4389#register-for-external-devices

Which version of SmartEVSE do you use?

Please use this modbus manual https://github.com/SmartEVSE/SmartEVSE-2/tree/b8b6a1a2def22a2bfc3cc30be2f2ef639e2d4389#register-for-external-devices Try to read register 0x00A0