Robert Heel
Robert Heel
It should be 0
Yes, 0 is broadcast address, in version 2.20 the load balancing option defines the modbus address (0=disabled, 1=master, 2=node 1....). will be fixed in next release.
Do you use modbus to get the measurements for the nice graph? Maybe to many collisions
We like to implement the smart features also in the sensorbox, which has a wifi interface as well. When sensorbox is present, it could take control over the modbus communication...
Yes, v2 is a different controller without WiFi
> PIN reset through a button on the front would void the protection. ... "holding a button on the front **when powering on**" If you are able to switch the...
Hi! What is the difference of option "solenoid" and "relais"? I thought it is the same ...
With the git version you could enable automatic StartCurrent detection - this will charge the first 40secs at 6 A
Hi! Yes, "All" is correct when the EM is placed in the same position as the EM from the power company. Then it must be able to detect the current...
SmartEVSE interrupts measurement when detecting another modbus master https://github.com/SmartEVSE/SmartEVSE-2/commit/1f0bc9ffe44c02f13dfd7752a36b76c7062dc0f0 10seconds is quite often, maybe try 30 or more seconds