Sven

@bok960731 Hi, could you help to confirm whether the application runs and log output is as expected. Besides to help to analyze the problem It would be better to share...

Hi, @nrllhclb From my experience, this kind of error "`[XRT] ERROR: No device found Error: Unable to find Target Device [XRT] ERROR: device is nullptr`" may be caused of lacking...

Hi, @Hamptonjc From my experience this error is caused by lacking of boot.scr. Most importantly the boot.scr should be prepared in image directory and give it to Vitis before generating...

@HankIC Hi Hank, Please check this link: https://github.com/Xilinx/Vitis-Tutorials/issues/287 to update the TCL file to support zcu106 and enable the I2C0 support. When you build the PeTalinux project in step2 please...

@shareefj Hi, I tried it in my side. I can not reproduce this issue. If you could provide your project I would help to investigate the root cause.

Hi, Kapoor Please refer to the following link to create a Vitis embedded acceleration platform(XPFM file). [Vitis-Tutorials/Vitis_Platform_Creation/Design_Tutorials/02-Edge-AI-ZCU104](https://github.com/Xilinx/Vitis-Tutorials/tree/2022.1/Vitis_Platform_Creation/Design_Tutorials/02-Edge-AI-ZCU104) By the way when you do step1 of the tutorial to create a...

@yakyol I cannot reproduce your issue. Could you provide your XSA file for further investigation or change to latest version to see whether issue exists or not.

@yakyol Hi, I can create DTS and DTBO based on your XSA file. Please see following log. `zynqmp.dtsi:439.38-449.5: Warning (interrupt_provider): /axi/interrupt-controller@f9010000: Missing #address-cells in interrupt provider also defined at pcw.dtsi:11.6-14.3...