Vitis_Platform_Creation 01-Edge-KV260

[yakyol]

https://github.com/Xilinx/Vitis-Tutorials/tree/2022.2/Vitis_Platform_Creation/Design_Tutorials)/[01-Edge-KV260]/step2.md

xsct createdts -hw ../kv260_hardware_platform/kv260_hardware_platform.xsa -zocl -out . -platform-name mydevice -git-branch xlnx_rel_v2022.1 -overlay -compile

Getting the results; zynqmp.dtsi:439.38-449.5: Warning (interrupt_provider): /axi/interrupt-controller@f9010000: Missing #address-cells in interrupt provider also defined at pcw.dtsi:11.6-14.3 zynqmp.dtsi:649.23-660.5: Warning (interrupt_provider): /axi/gpio@ff0a0000: Missing #address-cells in interrupt provider also defined at zynqmp-clk-ccf.dtsi:200.7-202.3 also defined at pcw.dtsi:83.7-88.3 INFO: Device tree generation successful

than next step dtc -@ -O dtb -o mydevice/psu_cortexa53_0/device_tree_domain/bsp/pl.dtbo mydevice/psu_cortexa53_0/device_tree_domain/bsp/pl.dtsi

fails; mydevice/psu_cortexa53_0/device_tree_domain/bsp/pl.dtsi:39.44-51.4: Warning (interrupt_provider): /fragment@1/overlay/interrupt-controller@80000000: Missing #address-cells in interrupt provider please advice

[allyzhou]

Thanks for reporting the issue, the owner has been notified and currently working on that.

[sven2314]

@yakyol I cannot reproduce your issue. Could you provide your XSA file for further investigation or change to latest version to see whether issue exists or not.

[yakyol]

I use the steps of https://github.com/Xilinx/Vitis-Tutorials/tree/2023.1/Vitis_Platform_Creation

my OS environment lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 18.04.1 LTS Release: 18.04 Codename: bionic

Versions; Vivado v2023.1.2 (64-bit) SW Build: 3954437 on Wed Aug 9 23:05:19 MDT 2023 IP Build: 3954312 on Thu Aug 10 04:10:56 MDT 2023 SharedData Build: 3952698 on Tue Aug 08 21:36:00 MDT 2023

Vitis 2023.1

kv_260_harware_xsa.tar.gz

[sven2314]

@yakyol Hi, I can create DTS and DTBO based on your XSA file. Please see following log. zynqmp.dtsi:439.38-449.5: Warning (interrupt_provider): /axi/interrupt-controller@f9010000: Missing #address-cells in interrupt provider also defined at pcw.dtsi:11.6-14.3 zynqmp.dtsi:649.23-660.5: Warning (interrupt_provider): /axi/gpio@ff0a0000: Missing #address-cells in interrupt provider also defined at zynqmp-clk-ccf.dtsi:200.7-202.3 also defined at pcw.dtsi:83.7-88.3 INFO: Device tree generation successful make dtbo dtc -@ -O dtb -o github/Vitis-Tutorials/Vitis_Platform_Creation/Design_Tutorials/01-Edge-KV260/ref_files/step2_pfm/mydeivice/psu_cortexa53_0/device_tree_domain/bsp/pl.dtbo github/Vitis-Tutorials/Vitis_Platform_Creation/Design_Tutorials/01-Edge-KV260/ref_files/step2_pfm/mydeivice/psu_cortexa53_0/device_tree_domain/bsp/pl.dtsi github/Vitis-Tutorials/Vitis_Platform_Creation/Design_Tutorials/01-Edge-KV260/ref_files/step2_pfm/mydeivice/psu_cortexa53_0/device_tree_domain/bsp/pl.dtsi:39.44-51.4: Warning (interrupt_provider): /fragment@1/__overlay__/interrupt-controller@85000000: Missing #address-cells in interrupt provider mkdir -p dtbo_output && cp github/Vitis-Tutorials/Vitis_Platform_Creation/Design_Tutorials/01-Edge-KV260/ref_files/step2_pfm/mydeivice/psu_cortexa53_0/device_tree_domain/bsp/pl.dtbo dtbo_output/

Following is my ENV： LSB Version: core-11.1.0ubuntu4-noarch:printing-11.1.0ubuntu4-noarch:security-11.1.0ubuntu4-noarch Distributor ID: Ubuntu Description: Ubuntu 22.04.1 LTS Release: 22.04 Codename: jammy I think maybe there is something wrong with your ENV. Please clean your workspace and try again.

[AnusheelXilinx]

Closing the issue as there are no further concerns.

Thanks Anusheel