piotr-go

Does register initial value work? Verilog example: reg [7:0] variable = 56; No errors but looks like initial value is "0".

ESP32-C3 does not work with version 7.1.1 and 7.1.0

5

ESP32-C3 does not work with version 7.1.1 and 7.1.0. Last working version 7.0.0. Board: https://pl.aliexpress.com/i/1005005780121305.html > ESP-ROM:esp32c3-api1-20210207 > Build:Feb 7 2021 > rst:0x1 (POWERON),boot:0xd (SPI_FAST_FLASH_BOOT) > SPIWP:0xee > mode:DIO, clock...

ESP32-S2 slow transfer

9

Hi I have 19Mb/s transfer speed on ESP32 and ESP32-C6 but only 4Mb/s on ESP32-S2. I suspect not enough RAM may be a problem. Can you enable PSRAM support for...

[Question] How to print over WiFi from Ultimaker Cura

6

I have: - Ender 3 Pro printer with SKR mini E3 v1.2 board (Marlin 2.1.x) - ESP32-S3 (or S2) module with ESP3D v3 FW, connected over uart to ender, two...

Hello, I managed to build the firmware for this camera, and everything seems to be working except for the audio. The MPV receives the audio stream, but there's no sound....