Adrian Keet

Docfix: Bound instances are right monad modules

5

`(>>>= id)` gives a natural transformation `t m . m ⇒ t m,` i.e. m acts on the right.

Hall effect endstop - sensing direction of sensor ICs is in the wrong direction

1

The SS39ET specified in the BOM senses magnetic fields perpendicular to the board. But when used in a hall endstop on VT/V2, the axially magnetized magnets point in directions parallel...

There are a couple relevant changes from free-3.3 to 4.6: - `Control.Alternative.Free` was restructured a bit. - Removal of `Control.MonadPlus.Free`. So we switch over to use `FreeT f []`. Also,...

The parts are modelled in such a way that the M3x8 screws extend 6.1mm into the slot (see first picture below), which is larger than the 6mm depth of the...

[ERCT] Front tag plate slot has the notch in the wrong location

4

This is a trivial issue but I am reporting it anyway. Please see the picture. The notch just needs to be moved 7.5mm to the right. 

The below outputs are with bindgen 0.71.1 (no flags) on `x86_64-pc-windows-msvc`. Consider the union below. There are two issues: - The accessors for `bitfld_b` and `bitfld_c` use bit offsets of...