[ERCT] Front tag plate slot has the notch in the wrong location

[arkeet]

This is a trivial issue but I am reporting it anyway.

Please see the picture. The notch just needs to be moved 7.5mm to the right.

[kullwarrior]

Great catch! Moving the face of the notch 7.45mm toward the tag plate insertion is the ideal distance.

[arkeet]

I think 7.5 is correct, the tag plate intersects the arm in CAD if that's what you were using as a reference. Not that 0.05mm would matter when printed.

[kullwarrior]

I use rear tag plate as reference

[arkeet]

Yes, the missing 0.05mm is because of the 0.05mm overlap in the model 🙂