Adrian Keet
Adrian Keet
The monad is `m` and the module is `t m`. Let me write `f = t m`. Referring to the definition in [nLab](https://ncatlab.org/nlab/show/module+over+a+monad#modules), the 1-cell is the functor `f: Hask...
Bumping this - someone I was helping was having a similar issue with a 24V 3 wire fan, where the fan was always spinning. Having a diode in line with...
I noticed this too when trying to assemble with cheap slide-in nuts with a 1.2mm step (but with Misumi T-slot). I think 1.1mm on the part is excessive - for...
I was looking to add this as well and came up with exactly the same implementation before seeing there was already a PR. Would be nice to see this get...
I think 7.5 is correct, the tag plate intersects the arm in CAD if that's what you were using as a reference. Not that 0.05mm would matter when printed.
Yes, the missing 0.05mm is because of the 0.05mm overlap in the model 🙂 