Vincent Poon

@AlexKlimaj Each Baseboard were test during production via connecting to the router and ping. The test method is the same as David above. Can do check on the hardware connection...

I think it's on these sheet at the moment, but it's not very visible and updated. https://docs.google.com/spreadsheets/d/192yS1ewajvsgp90g_rVM3QiBnM678sPVkYVWaQhRWBQ/edit#gid=306908149 https://docs.google.com/spreadsheets/d/1Su7u8PHp-Y1AlLGVuH_I8ewkEEXt_bHHYBHglRuVH7E/edit#gid=306908149

@meee1 did I miss something from the previous PR https://github.com/ArduPilot/MissionPlanner/commit/2c336fef6da34160c5334123ebde6bc97cb12b83 that would cause this? Thank you so much.

> Here’s one where the baro drops to -2000m > > https://review.px4.io/plot_app?log=75c51333-d471-46d5-a183-0c81e0e65657 @julianoes Can you take a look at this?

> I can confirm there is problem with using I2C and SBUS RC in at the same time. > > I tried the old X6R FrSky and the new TD...

@patrickelectric @mrpollo Greatly appreciated.

> Sorry for being a total (github) noob here, but how do i get this daily build? > > I have the 6C and its not working. Im used to...

Tried the following with [QGroundControl Android Version 4.2.0 64bit](https://docs.qgroundcontrol.com/master/en/getting_started/download_and_install.html#android) ### Pixhawk5X, Durandal, Pix32 V5 : - Direct connection - **unsuccessful**: - Connection via Telemetry - **unsuccessful** Note: All has USB-C...

> Sorry, I forgot to mention the Firmware details. it is now added to my original comment and it is v 1.12.3 I just reproduced it, it seems like it...

@julianoes @bkueng Any idea why there is such a delay? Doesn't happen in betaflight. https://github.com/PX4/PX4-Autopilot/assets/46874772/580fcc1c-0c21-410f-9d96-45e96ec0e37b