Víctor Jeremy Espinoza Morán

ROSCO Controller Question

6

Hello, I'm using the ROSCO controller the IEA 3.4 RWT, within this scenario: Steady wind speed: 15.5 m/s I set the initial conditions to: initial rotor speed: 12.1 rpm and...

Pitch Control Simulink

3

Hello, I'm using the SFunction block to integrate OpenFAST and Simulink. I have a question: Should the pitch angle command I send to the SFunction be the same as the...

InflowWind output for pitch control

3

Hello everyone! I'm willing to design a reinforcement-learning-based controller for the blade pitch angle. For the states' definition, I need the wind velocity at each timestep, and I'm using an...

I plan to train the model with printed text instead of handwritten. You think It will work? what do you recomend to me?

Drivetrain OpenFAST

1

Dear all,  I got this image from this document: Wind Turbine Drivetrain Modeling in Simscape/SimDriveline and Interfacing with FAST in Simulink—User’s Guide Why are the rotor power and torque...

Drive train OpenFAST

1

Greetings @jjonkman! I have a question. I'm planning to start a project making a drive train for a turbine model. Is there a way for me to couple my custom...

WT structural loads an pitch control.

5

Hello everyone I do not know if this is the right place for this question, but this doubt originated from a OpenFAST signal analysis. I'm doing a pitch controller using...