Víctor Jeremy Espinoza Morán

I plan to train the model with printed text instead of handwritten. You think It will work? what do you recomend to me?

Dear  @jjonkman  Thanks I did not notice the lidar parameter. I think it is a new section in the OpenFAST inflow file because it isn't within the InflowWind documentation. For...

@jjonkman I changed the conditions to 11.75 rpm and 14.5 deegres. I'm using a timestep 0.001  The generator power is near the rated value (3.37 MW), but it still...

@jjonkman For better understanding:  data3 is the pitch angle command and data4 the actual WT pitch angle, both in rad. You can see when I send another command the...

Dear @jjonkman I'm now very clear about the pitch angle issue. About the oscillations, they happen only with speed, because I have set a cosntant torque in region 3. Is...

Ok, thank you. I have reviewed it, and now I have another doubt:  I'm sending as a pitch command the same pitch angle for 1 second, then I send...

@jjonkman Thank you for the advice. Is there any document where that fact is stated? That is what reviewers of an article ask me to do. I've included the blade...

Thank you @jjonkman!! Last, any insight about the tower side-to-side bending moment's affectation in pitch control?