tube0013
tube0013
**Is your feature request related to a problem? Please describe.** Request and placehoder for information about the Tuya Curtain motor > specfically: https://zigbee.blakadder.com/Moes_AM43-0_45_40-ES-EB.html z2m device: z2m fromZigbee: z2m toZigbee: **Describe...
Serial connections are very unreliable when using this component with any ESPHome Version greater than 2021.9. By unreliable I mean the connection resets every few hours.
Hi, the Grizzl-E smart charger uses an ESP32 for Wi-Fi and it's application. Their firmware is a mess, and not very compliant to OCPP. What all would be required to...
Make Docs more intuitive for finding correct information and binaries for different models.
Disabling the Static IP in PF Sense resolved.
@tube0013 I ran a similar setup to onedr0p with the same coordinator (he recommended it and I got it). It looks like mine started failing this week. I tried to...
z2m failures
Well I did update both esphome firmware and the controller firmware and now all my devices are not working. I have tried restarting the PoE controller and zigbee2mqtt a few...
You may want me to start a new issue for this.... In addition to the routers going offline (unless I adjust the rep interval), my Sengled light bulbs connected to...
In Smartthings, I have a contact sensor that also reports temperature. I've tried to pull the temperature into HA as my first test of this bridge but I'm not having...
Hi @MattWestb could you share the app.c used with your Billy router FW? I'm attempting to make router fw for the mgm12 and 21 modules and not having much luck....