tube0013
tube0013
I just got these blinds. I used the quirk above and the remote to invert the motor and all is good. Though I have the battery on one plugged in...
If it's this device (https://www.aliexpress.com/item/1005003703086386.html) I have one on it's way and have a tuya gateway I bought a while back to take a look inside, but have never set...
all these modules come from tuya with the same TS0601 model to the manufacturing shops. the manufactures hit up the tuya sdk site flip a couple things or follow steps...
> I made a quirks which is working with my Zemismart ZM25TQ. It's [here](https://github.com/zigpy/zha-device-handlers/pull/801). > > If you look at the implementation in mqtt2zigbee there are quite few differences but...
directory exists at /config/esphome/.esphome on supervised install.
Connection will get reestablished. Problem being serial is disconnected frequently for small amounts of time while reconnects and zigbee network restarted.
Are there any open source fw's that could be made to work with the grizzl-e? seems like being esp32 based it might be a more viable solution. https://github.com/matth-x/ArduinoOcpp possibly? would...
> My board. I have the same one. It's connected with an 8 pin header to the main board to get a look at any of the controllers on the...
Any type of timeline for when this could be implemented? I'm looking to try the hardware flow for UART from https://github.com/esphome/feature-requests/issues/1126#issuecomment-1010316131 but require Ethernet support (Olimex and WT32-ETH01)
It's based off the name of the device