tomflexcompute
tomflexcompute
The current Bloch boundary causes a wavelength-dependent incident angle, which is not ideal in broadband simulations with oblique incidence. Users usually want to fix the incident angle as it's commonly...
So far a few users have reported simulation with mode source but it didn't inject anything as the mode solving didn't find any mode. This can happen when target_neff is...
For structures imported from stl files, current `plot()` and `plot_3d()` can either be wrong or not show the structures at all, which led to some user frustration. Could this be...
If I understand correctly our field projection at the moment only works with absorbing boundaries. If so, is it possible to add support for 2D simulations and periodic simulations in...
I think we briefly discussed about this issue a while back but I lost track of the status of the issue. To recap, when modeling a microstrip line, the local...
Users suggest adding some indicator in the plottings both 2D and 3D such that users can see the size of the beam better. This helps determine if the simulation domain...
The following is coming from a user's feedback: When doing a batch for parameter sweep, users need to actively keep track of the parameter values used for each simulation. If...
[Cauchy model](https://en.wikipedia.org/wiki/Cauchy%27s_equation) for the refractive index is quite commonly used for semiconductors and glass materials, similar to the Sellmeier model. Currently users can define a Cauchy model and use our...
For simulations that require a long run_time (high Q devices, very long devices, etc), it could be a bit hard to estimate a good run_time. Therefore, we sometimes run into...
Optical force calculation has been requested by two users and probably more users are interested in it. It seems to me that force calculation in FDTD from integrating Maxwell's stress...