sygys

Pre-installed units

46

Im planning on making a few pre-installed wifi controllers. I designed a circuitboard with the size of the ESP in which the esp32 is placed on the board and the...

Delay in commands

3

A few times now i experienced that when the module gets 2 commands in a short time not all commands are executed. could there be a delay added to the...

Ac going through 3 states when automation is running

9

I have an automation to start the ac on dry when the humidity is high in the room. But for some reason when that hits the state of the ac...

Which hardware is supported

5

Im new to this. i just watched a video on youtube about this and want to implement it into our home assistant. Im new and dont have any experience with...

Project

1

This project looks amazing. I want to order an ESP8266 OPENTHERM GATEWAY. And was looking at the code. But i wondered if more MQTT topics can be created. The gateway...

Raw code

5

Hi @ee02217 We spoke a while back about the integration and putting it in node red. At the moment i use node red and turn on the zb1 heater using...

Errors

3

I keep getting errors from my heater. Get_prop is giving errors also update errors randomly. Also i see home assistant slowdowns when the heater is active. Things like scrolling through...

external temperature sensor

1

Hey Dominik / @DomiStyle , Its been some time since we spoke. My ac's run like a charm for quite some time now with your code. I remember scrolling through...

Files missing

2

These files are missing in the provided files Finally, run the following commands from the C:\tensorflow1\models\research directory: (tensorflow1) C:\tensorflow1\models\research> python setup.py build (tensorflow1) C:\tensorflow1\models\research> python setup.py install i also miss...

I followed your tutorial to the point where i need to do the pip command in the cmd prompt. It tells me: ``` WARNING: pip is configured with locations that...