solidssss

Support for Smartmi Smart Fan Heater (zhimi.heater.nb1)

2

**Device information:** - Name(s) of the device: Smartmi Smart Fan Heater (zhimi.heater.nb1) - Link: https://www.amazon.es/Xiaomi-Heizger%C3%A4t-Leistung-Schwenkbetrieb-steuerbar/dp/B08P64ZGJJ - Model: zhimi.heater.nb1 - Hardware version: esp32 - Firmware version: 2.0.8 It would be really...

Button to enable/Disable Internet Access to connected devices

1

It would be a really nice feature to have a button to enable/disable internet access to connected devices. If it's not too hard/time consuming to implement.

Please make a headless option

3

I'm getting an error when I try to install, I think it is because I run headless, not sure though. Here is the error: **npm start** ``` > [email protected] start...

Problem with seed4mic respeaker

1

I have installed everything in the guide on my raspberry pi 3b+ and did the asound.conf. If I run "./ec -i plughw:CARD=seeed4micvoicec,DEV=0 -o plughw:CARD=seeed4micvoicec,DEV=0 -d 200 -s" This is what...

I've tried for hours now and I cannot make it work with a respeaker core v2. All I ever get is static noise from the output file. The command "./ec...

### Which version is your board? Respeaker V2 I followed [this guide](https://github.com/respeaker/get_started_with_respeaker/blob/master/docs/ReSpeaker_Core_V2/old_way_flash_emmc.md) to flash the EMMC the old way, since I don't have a working sd-card reader on the respeaker....

### Which version is your board? Core V2 Hi. The SD-card reader on the board is really sensitive and crappy and does not read the sd-card very well. It worked...

Save .wav file after wake word detected?

1

Is it possible to make respeakerd save a .wav file after it has detected the wake word? Let's say I talk for 4 seconds after the wake word is said,...

I'm sorry but I did not know just how bad the audio output sounds with 16khz though the 3.5mm. If I had known before I bought it, I'd return it....