Scott Deaton
Scott Deaton
We need codelists for triaxial tests - ones for total stress and another list for effective stress. The total stress values I propose are: UNC - unconfined compression test UU...
Roles
@dponti Do we have a set of valid values for the Role object? I think we need things for at least the following: Driller Driller Operator (CPT) Logger Drilling Contractor...
There was a unit previously available in 2.5 that is not present in 2.6. There is lbf/ft2 (psf) but there is not lbf/in2 (psi) pound-force per square foot
In the AGS standard there are two particle size percentages that are used for oversize correction, but in the ASTM Standards there are 3 particle sizes used for oversize correction....
I believe the forcePerTimeMeasure enumerations are incorrect. These appear to mostly be PressurePerTime. forcePerTime should be something like a N/s or lbf/sec. We need to correct this to have both...
We have an issue with the energyDensity element where it's uom attribute doesn't seem to be valid. The units of measure are in the kernel for it, but I don't...
I believe we may need to add a PPMV unit of measure for the volumepervolume unit of measure type. Refer to the attached. https://askanydifference.com/difference-between-ppm-and-ppmv-with-table/ AGS indicates that the IFID test...
We have an enumeration for a uomType of resistance, conductance and radioactivity, but there are no units specified for these. We need to add the following at least: resistance -...
We need to define the controlled value list for LithologyClassificationType. These could be something like: Soil, Rock, Other It could also be something like: USCS, USDA, AASHTO, BSI, AS1726, etc....
We need to have a unitofMeasure for mv. This would be something like m2/MN or in2/lb. This is needed in consolidation tests.