sachendras

Add rules for controller-card power-off

2

Add rules for controller-card power-off. Internal doc go/controller_card_gnmi_shutdown for more context.

"Multiple VRFs and GUE DECAP in Default VRF" README.md

3

RT-3.3: Testing "Multiple VRFs and GUE DECAP in Default VRF"

Update testregistry.textproto

2

Introducing new tests RT-3.3, RT3.31 and RT-3.32. These tests cover multiple VRFs and policy based routing used to switch traffic between VRFs, while GUE Decap and Encap is also happening.

ERR README.md

3

Added Yaml details

# Request for New Test Code Implementation Instructions * The label 'enhancement' is automatically set by this template. * Add a label for the test priority according to the test...

Update gNOI.bgp.proto

1

Current gNOI.BGP proto lacks guidance on how the ClearBGPNeighborRequest.Hard must be handled. As per RFC4486, code6 subcode 4, ```If a BGP speaker decides to administratively reset the peering with a...

Create README for RT-3.52 Multidimensional test for Static GUE Encap/Decap based on BGP path selection and selective DSCP marking

3

Updated the entire test with: - Full details on Advertisements, IBGP, EBGP and IS-IS configuration - Needed Flows - Basic Health check parameters pre and post each test - All...

RT-1.35 - Group of paths to be tested

4

This is a placeholder test to cover for all OCpaths for edge aggregation that are not already covered in any FNT.

policy_based_traffic_steering_default_to_nondefault_and_GUE_Decap.REA…

2

…DME.md New test to cover for gradual migration of Traffic from Default to Non-Default VRF

Create bgp_transport_parameters

9

New test to check for 1. Possibility to configure a BGP neighbor for a different transport port than the default 179 for EBGP and IBGP 2. Use different leaves to...