Richard Fitzgerald
Richard Fitzgerald
On TGL UpXtreme with upstream 6.3 kernel we're seeing: ``` kern :err : [ 4.428226] sof-audio-pci-intel-tgl 0000:00:1f.3: error: failed to ready HDA controller gctl 0x0 kern :err : [ 4.428264]...
Hardware setup: UpXtreme TGL-0000 with BIOS R1.6 in NON-SoundWire mode connected to CDB35L56-FOUR-HD. HAT I2C for control. HAT SSP2 for audio. Software: Kernel v6.1, with CS35L56 ASoC driver and TGL...
6.10 kernel UpXtreme TGL + CDB35L56-EIGHT-C (SoundWire) Play audio, then system-suspend while audio is still playing. We're seeing that with the 6.10 kernel there is a WARN triggered in the...
The UpXtreme i14 (MTL) reports in ACPI that it has a RT711 on SoundWire bus 0, but it does NOT have a RT711. (Apparently this is quite common for motherboard...
…nnels The alh-copiers for 2nd and 3rd feedback links were not setting the number of channels, so it was defaulting to 2 channels. The number of channels on these copiers...
There is a spurious pulse on the clock line when exiting clock-stop without a bus reset. The peripherals will interpret this as the first bits of a frame and so...
…atency Issue DP prepare to all ports that use full CP_SM. Then wait for the prepare to complete. This allow all the DP to prepare in parallel to reduce the...
The code under sound/soc/sdw_utils/* was originally under sound/soc/intel/* so was included by the "INTEL ASoC DRIVERS" section of MAINTAINERS. When the code was moved out to sound/soc/sdw_utils/* there wasn't an...