Reinder Feenstra
Reinder Feenstra
I use ssh-deploy for a while now, it is great! However I've one issue. If the remote directory path not fully exists it fails. In my case the branch name...
This morning I got the error mentioned above, because it failed to get the ini file. But on my server I haven't installed curl which results in a blank website...
See #120
Starting with firmware version 1.20 the Z21 supports also Motorola for accessory decoders via the `LAN_GET_TURNOUTMODE` and `LAN_SET_TUNROUTMODE` commands. An address can only be used once via DCC or Motorola,...
@cyrilpawelko send a zip file with code for supporting DCC-EX over TCP, with the request to integrate it. This issue will keep track of that.
Add support for Doehler & Haass [FCC](https://doehler-haass.de/cms/pages/produkte/digitalsystem/fcc.php) command station. Protocol documentation: https://doehler-haass.de/cms/media/pdf/FCC_Interface_Doku.pdf (in German)
Selectrix interface protocol documentation: - http://uwe-magnus.de/inter2/inter2an.html (German)
The [Märklin L 88 (Link s 88)](https://www.maerklin.de/en/products/details/article/60883) can be used to connect additional S88 feedback buses to the CAN network. Auto detection is possible as the device responds to a...
After doing some testing with Traintastic/ECoS LNCV programmer together with @memen45, we learned more about possible LongAck's that can be send by a LNCV capable LocoNet device and some improvement...
The current ObjectList implementation has some drawback. - The server side implementation uses some forwarding stuff that doesn't compile on MSVC and requires additional includes in other files. - The...