Reinder Feenstra

For my project I log at startup all version info of 3rd party components that are used, would be great to add one for `tcb::span` too :) Thanks for all...

@Krinkle The problem is that in case of a failure of the selected method, the following method is used (the case has no break statements!) without checking if it is...

Yeah it is a bit different since you last used it, I refactored the output system to support different types of outputs, I wanted to add support for DCCext and...

> This new way of adding outputs is very cool by the way, especially when you need more addresses for a turnout like a double slip switch Thanks :)

The *Fleischmann 6066* I have are single motor, they only have a crossed and diverged position. When reserving a path it only "uses" the specific ones as crossed and diverged...

> 1. Creating 2 turnouts and setting them to a Z21 it always starts from address 1. Is this intended behavior? Fixed it, it was already working in the server...but...

> 4. I cannot disable some of the position of a double slip switch > 5. "Enabled" could be better than "Use" for output_map:use. These are the only remaining (the...

@gfgit I've added a "Dual motor/coil" setting that controls the available positions for slip turnouts. Going to improve the output mapping further by removing the "use" column for all output...

@gfgit I've added icons too, I'd hope this new output mapping is better than the old version :)

Awesome! This is something that was still missing. Another method of testing is using the output keyboard, turnout's etc. should also respond to that. There are also some catches: -...