pauledd
pauledd
thanks! But strange, if I pair the thermometer to my android I read battery is at 59%. If I then connect via gatttool and send: char-write-char-write-req 0x0034 082400000000 I then...
Well, my 1st. sensor shows at 22°C a value of "dc000000" and at 29°C "22010000" that would be 220 and 290 dec in little endian. Quite weird to have little...
just as a side note, Seek Thermal states that > All Seek imagers are generally accurate within 5 degrees C above or below the reading (http://www.eevblog.com/forum/thermal-imaging/seek-compact-pro-temperature-readout-issue/msg1403982/#msg1403982) I got a new...
@undera can you please explain how you came to this line of code? `return (0.0171156038 * x + 37) - 273;` Where do you got the 0.0171156038 and the 37...
@undera thanks, just one more question: you state > // 330C => 603K => 32768 raw (known upper limit, full 15 bits - 2^15) in your seek_viewer.cpp. Can you pls...
ah, okay. I will try that too :)
> made seekpro to have 15fps by default What do you mean with this? Isn't the Seek Pro restricted to ~9fps?
> My approach of making sure sensor has certain temperature is simple: I turn camera off in a room with air conditioner set to certain temp, I let it quite...
I just noticed that I took pictures in APS-C mode so the files are wrong size. I shoot another pair in 24MP format and corrected my images above. To be...
yeah I stumbled upon that page but I flinch from that procedure because of its complexity and pricey color charts (I guess some cheap card wont do it since it...