Erik Palsbo

Not responding to 1wire

1

Hi Hav have tried to get this to work on an Arduino Nano and an ATtiny85 but with no luck. I can compile to both and Pin 13 LED is...

Error: Invalid argument in OWFS

9

I am using an ATtiny85 to emulate DS2502. It works fine with OWFS on Raspberry Pi  When using OWFS on Synology DS115 (Same compiled version as on Pi), I...

## The problem An item (lamp) is activatet by a rule (Pir event). The Pir has an expire of "1s" Items: ``` Switch pir5 "Pir 5" {channel="mqtt:topic:rflink:pir5", expire="1s"} Switch pir6...

Problem parsing color

2

I try to chage color on a RGB light bulb (color node). When reading from the node, it says "deviceType: 'color', value: array[3]. I try to inject msg.payload={"value":[200,0,0]} msg.topic =...

Using LILYGO Lora T3_V1.6.1

1

I try to get this working wilt the LILYGO Lora board, but without success. The board uses SX1276 on following pins: MOSI 27 SCLK 5 CS 18 DIO 26 RST...

ESP8266 Core 2.5.x

3

Are there any fix for getting it to work with Core 2.5.x?

Cannot start cc2652p

3

I have not been able to connect with CC2652 to zigbee2mqtt. This is my log: Using '/app/data' as data directory Starting Zigbee2MQTT without watchdog. [2024-07-13 12:03:11] info: z2m: Logging to...

Enhanced remote funktion and SX1276 option.

3

### Describe you new feature you'd like First: thank you for a really good and well-worked project. I have implemented it with HA for 3 awnings and 2 slat curtains....