Erik Palsbo

Ups! I realise that I am using an I2C to OW interface on the Pi but a DS9490 USB plug on the Synology. Using the DS9490 on the Pi gives...

I was also looking for 256bits fonts - any progress on this? Great program by the way.

I made a ESP device with your lib at it works. I further developed it to support color-light. Is a bit confused about color-temperature ligt and color-light, but it is...

You have made a greate job with this library. Thank you! I have a hard time finding my way around the code. I tried to find a way to test...

I use this to reset into factory-reset. ` DeviceLayer::ConfigurationMgr().InitiateFactoryReset(); ` Activatet by a button to a pin. Google Home and Matter is just not working yest. Yes you can pair...

I implemented my example on a ESP32 with a small color TFT and 2 buttons. [Here](https://www.tinytronics.nl/shop/en/development-boards/microcontroller-boards/with-wi-fi/lilygo-ttgo-t-display-v1.1-esp32-with-1.14-inch-tft-display) The code is a bit messy, but I will give you my files. Hope...

Google Home does not yet pair on iPhone (IOS), but you can pair on Androit and then it will work on IOS too.

About Google Certification. This is a bit stupid about google. I think you need to register a test-device. Look at this: https://developers.home.google.com/matter/test#create Go to the Developer Console Create a Matter...

I made a Matter device with 3 windowCovering endpoints. It controls 3 Somfy blinds and I can open, close at set to x% opening from Google Home. It is build...

Thanks again. I ran into a few problems. I needed to change a bit, as I am using an array og endpoints. In the function, I changed the updae call...