msmthng
msmthng
I was able to flash using a modified CH340.  After reconnecting the device (with an unmodifed) USB Adapter, the blue led on the ESP8266 is flashing. No WiFi is...
what to that values provided by the mqtt nodes displaying the latest available functions set in the ccu ui. i have added a functions in ccu ui. but the functionslis...
i have added this line to expression config: count [;layer:.*] Flashprint this is the gcode source example: xgcode 1.0 ;machine_type: Creator Pro 2 ;left_extruder_material: Flashforge-PLA-1 ;left_extruder_material_density: 1.24 ;filament_diameter1: 1.75 ;left_extruder_temperature:...
- [ ] I have read the [README.md](https://github.com/flyte/pi-mqtt-gpio/blob/develop/README.md) file and visited the [Documentation](https://mqtt-io.app/) to see if the information there helps. **Action description** sending messages when gpio connected to 3.3v **Previous...
Hi, i would like to use my flashir sd within octoprint to handle sd card listening etc. there fore i have to create lists etc. on the resonses for the...
The Upload is working also the start to print from SD Card. The printer is not answering to the SD listening request (not supported by the firmware used). does it...
Hi, can you share the grafana dashboard used in the monitoring video? thx
hi i get this error on the sender: pihole-sync-sender | Host key verification failed. pihole-sync-sender | rsync: connection unexpectedly closed (0 bytes received so far) [sender] pihole-sync-sender | rsync error:...