OllisGit
Layer indicator issue with Flashprint gcode files
i have added this line to expression config:
count [;layer:.*] Flashprint
this is the gcode source example:
xgcode 1.0 ;machine_type: Creator Pro 2 ;left_extruder_material: Flashforge-PLA-1 ;left_extruder_material_density: 1.24 ;filament_diameter1: 1.75 ;left_extruder_temperature: 185 ;layer_height: 0.18 ;perimeter_shells: 3 ;top_solid_layers: 3 ;bottom_solid_layers: 3 ;fill_density: 15% ;fill_pattern: hexagon ;base_print_speed: 60 ;travel_speed: 100 ;platform_temperature: 55 ;left_extruder_temperature_raft0: 0 ;right_extruder_temperature_reset: ;left_extruder_temperature_reset: 1,200;4,180;10000,185; ;start gcode M118 X51.48 Y15.83 Z4.65 T1 M140 S55 T0 M104 S0 T0 M104 S185 T1 M107 G90 G28 M132 X Y Z A B G1 Z50.000 F420 G161 X Y F3300 M7 T0 M6 T1 M651 S255 ;layer_count: 25 M108 T1 G1 X22.90 Y-15.82 F6000 ;preExtrude:0.20 G1 Z.200 F420 ;structure:pre-extrude G1 X22.90 Y-15.82 F6000 G1 X22.94 Y-15.82 E.0058 F1200 G1 X25.22 Y-15.59 E.3381 G1 X27.52 Y-14.94 E.6847 G1 X29.14 Y-13.87 E.9662 G1 X29.44 Y-13.57 E1.0278 G1 X29.80 Y-13.05 E1.1195 G1 X30.22 Y-12.81 E1.1896 G1 X30.72 Y-12.80 E1.2622 G1 X32.61 Y-12.07 E1.5560 G1 X33.60 Y-11.29 E1.7387 G1 X34.73 Y-10.04 E1.9831 G1 X36.03 Y-8.21 E2.3086 G1 X37.06 Y-6.20 E2.6361 G1 X37.79 Y-4.06 E2.9640 G1 X38.21 Y-1.85 E3.2902 G1 X38.32 Y.41 E3.6184 G1 X38.10 Y2.66 E3.9462 G1 X37.56 Y4.85 E4.2733 G1 X36.72 Y6.96 E4.6026 G1 X35.54 Y8.95 E4.9381 G1 X33.88 Y10.97 E5.3173 G1 X32.30 Y12.21 E5.6085 G1 X30.37 Y12.89 E5.9053 G1 X30.06 Y12.90 E5.9503 G1 X29.80 Y13.04 E5.9931 G1 X29.56 Y13.43 E6.0595 G1 X27.90 Y14.78 E6.3698 G1 X26.58 Y15.29 E6.5750 G1 X24.40 Y15.71 E6.8969 G1 X22.53 Y15.83 E7.1686 G1 X17.23 Y15.83 E7.9372 G1 X15.24 Y15.23 E8.2386 G1 X13.54 Y15.23 E8.4852 G1 X12.25 Y15.75 E8.6869 G1 X11.44 Y15.83 E8.8049 G1 X-22.75 Y15.83 E13.7629 G1 X-25.22 Y15.59 E14.1228 G1 X-27.52 Y14.94 E14.4694 G1 X-29.14 Y13.87 E14.7509 G1 X-29.44 Y13.57 E14.8125 G1 X-29.80 Y13.05 E14.9042 G1 X-30.22 Y12.81 E14.9743 G1 X-30.72 Y12.80 E15.0468 G1 X-32.61 Y12.07 E15.3407 G1 X-33.60 Y11.29 E15.5234 G1 X-34.73 Y10.04 E15.7678 G1 X-36.03 Y8.21 E16.0933 G1 X-37.06 Y6.20 E16.4208 G1 X-37.79 Y4.06 E16.7487 G1 X-38.22 Y1.85 E17.0752 G1 X-38.32 Y-.41 E17.4033 ;raft ;layer:0.27 ;support-start
but when iam loading the file i get:
Attention Layer indicator not found in file: 'SmartFilametSensorMount.gx' Check 'layer pattern', 'Look ahead limit' in DisplayLayerProgress-Settings and reUpload the file!
Any ideas why the parser does not find the layer indicators.
the look ahead limit is higher then the first match.
THANKS FOR HELP!
