Renato

Hi Martin, Long time since my last message. I solved this issue changing the original object name, sending this to you just to let you know. the following config lines...

Object protocol case issue

2

Hi Martin, Seems another case issue. Receiving error for the following parse ~~~~~~~~~~~~~~~~~~ object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service same_name2 service-object object TCPUDP ~~~~~~~~~~~~~~~~~~ Error: ~~~~~~~~~~~~~~~~~~ #[-]...

Hi Martin, This one I correcting manually as it is stopping parse when it find a case like this. I ll leave as suggestion for future if possible. Trying to...

Object Names| same name, different case and different content -> checkpoint rules wrong

4

Hi Martin, Sorry to bother you again, I think this one is important. I have one case of same object name but different case on config I am parsing. This...

cisco asa: network mask issue

3

Hi Martin, Sorry to send so much things over to you. When a network is new loading an ACL, seems netmask is being incorrectly interpreted. Try to process the following...

prefix to name objects

2

Hi Martin, If I import an existing checkpoint config ( with --cpPortsFile and/or --cpNetObjFile), if exist an exact same object name it does not check if also the port, IP...

cisco asa: nat (outside,inside) source static

2

Hi Mart, Nat config line is not being loaded, is it normal? config example: object network obj-10.1.1.16 host 10.1.1.16 object network obj-10.1.1.16-nat host 1.1.1.16 object network obj-dest-192.168.1.16 host 192.168.1.16 nat...

thanks for scrip

2

Hi mikepitagno, Thanks for your script very useful! Is it possible to add the "object-group service" to the checking? Is it possible to the output be the "clean config"? thanks,