GoSecure
cisco asa: nat (outside,inside) source static
Hi Mart,
Nat config line is not being loaded, is it normal?
config example: object network obj-10.1.1.16 host 10.1.1.16 object network obj-10.1.1.16-nat host 1.1.1.16 object network obj-dest-192.168.1.16 host 192.168.1.16 nat (outside,inside) source static obj-10.1.1.16 obj-10.1.1.16-nat destination static obj-dest-192.168.1.16 obj-dest-192.168.1.16
thanks,
Yes it is currently unsupported as I had too many issues.
Mart sent from my cellphone
On Apr 21, 2017 17:26, "mjardeli" [email protected] wrote:
Hi Mart,
Nat config line is not being loaded, is it normal?
config example: object network obj-10.1.1.16 host 10.1.1.16 object network obj-10.1.1.16-nat host 1.1.1.16 object network obj-dest-192.168.1.16 host 192.168.1.16 nat (outside,inside) source static obj-10.1.1.16 obj-10.1.1.16-nat destination static obj-dest-192.168.1.16 obj-dest-192.168.1.16
thanks,
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/GoSecure/Cisco2Checkpoint/issues/6, or mute the thread https://github.com/notifications/unsubscribe-auth/AECtwjJ47OpTBLT5uW4ANA5tYUytgtUuks5ryR7tgaJpZM4NEzm7 .
