Reunion974

I display a gif anim with the same resolution as my display (480x320) on a pi zero w with a GPIO screen. command : FBpyGIF -fb 1 ./happy.gif The result...

ZHA / mode historique. Valeur puissance incohérente et peu raffraichie

6

Bonjour, Avant tout, j'ai essayé de suivre toutes les discussions ici mais c'est vraiment compliqué. Les instructions du readme concernant ZHA sont elles à jour? -> Y aurait-il des étapes...

Modifying a custom card do not work

1

I'm trying to modify the field "orp_setpoint" in custom:pool-monitor-card I replaced orp_setpoint with orp_setpoint_template and then I tried different syntaxes, without sucess. ``` type: custom:card-templater card: type: custom:pool-monitor-card language: fr...

Request support for Kolanky 3.6kW EV charger

3

# Log Message ``` {"10": 0, "101": "charing", "102": 244, "105": 96, "109": 23, "110": 385, "112": 2, "113": "Max16A", "114": 10, "115": 10, "118": 0, "119": 0, "120": 1,...

[stability issue] TS0004 _TZ3000_u3oupgdy 4 channel dry contact 7-32v

1

### Problem description Device TS0004 _TZ3000_u3oupgdy corresponding to product: https://fr.aliexpress.com/item/1005006148896015.html?spm=a2g0o.order_list.order_list_main.266.44ec5e5bqqQk8B&gatewayAdapt=glo2fra  Is recognizer under zha with automatic selection of Quirk: zhaquirks.tuya.ts000x.Switch_4G_GPP. The device is a 4 channel dry contact NO/NC...

**Version of pynab:** v0.xx.xx Branche : release Version : v1.0.2-0-g6a847d66 Mise à jour indique 'à jour' partout Raspbian GNU/Linux 10 (buster) - Kernel 5.10.103-v7+ #1529 armv7l Ordinateur Raspberry Pi Zero...

Webflasher connection failed with SLZB-06M

10

I use a SLZB-06M with latest original coordinator firmware with Zigbee only. As I'm trying to run at the same time ZHA and Z2M I'm trying to flash ncp-uart-hw-v7.4.1.0-slzb-06m-115200.gbl firmware...

History explorer card not in HACS default repo

1

Hello, This is not a real issue, but just to let you know that history explorer card is not is the default hacs repo as mentioned in the doc. Need...