Reunion974
Reunion974
As off122a said, just replace the name of each device with its IP in config.json file
J'ai essayé sous Z2M et le résultat n'est pas beaucoup plus concluant. J'avoue que je suis vraiment très décu par le Lixee zlinky. Au final j'ai une pince amperemétrique qui...
Sur mon linky la puissance apparente est actualisée toutes les heures. J'ai vu que c'était différent pour d'autres. Pourtant j'ai essayé avec zigbee2mqtt, je suis passé du firmware 12 à...
Merci. Est il possible de paramétrage le config report ou le polling sur ZHA ?
All recent post in community say the same thing. I guess this card is not working anymore
Sorry. Please find the file attached. I removed the device from local tuya and included it back recording logs. You can look for "EV charger" in the logfile: [home-assistant_tuya_local_2024-04-27T06-00-40.707Z.log](https://github.com/make-all/tuya-local/files/15137219/home-assistant_tuya_local_2024-04-27T06-00-40.707Z.log) I...
After more testing, it appear that the file I uploaded is working fine. You can control it, make some improvement and validate it. The problems I reported earlier have diseapered,...
Sorry but since last update my kolanky charger 1 phase is not recognized anymore. Before it was working fine with the following file. Is there a 1 phase and a...
The device required a pairing VERY close to the skyconnect. After that it seem to lose the connexion randomly. Generaly after many trials the switch is finally set.