Frans

Yup, same problem, and tried the 'copy local' workaround. Your dashboards will fail as soon as the local cache expires and the browser is forced to retrieve a new copy...

> “go to paramters, dashboard and click on the 3 dots to add the /hacsfiles/flex-horseshoe-card/flex-horseshoe-card.js?hacstag=20729272514 as follow” > > All i did with mine was change last digit of the...

The card magically started working again at my end. Saves me the trouble of replacing 103 controls :) Edit: NVM this, it broke again. It's a great card, but it...

I have the same issue. Hardware = SMLight SLZB-06M via ethernet. Worked fine before the upgrade. After the upgrade, Z2M crashes within minutes after startup. I switched to the dev...

Yes- tried everything. Even downgraded back to 2.6.3 from a backup that worked fine up until yesterday. The error stays the same however. So reverting back to a backup- or...

@Nerivec found something interesting; The network is stable as can be- but it seems SMLight published a firmware yesterday too (Revision: 20251204) that ended up to be updated in my...

> [@koevoetsfjm](https://github.com/koevoetsfjm) try these just in case https://github.com/Nerivec/silabs-firmware-builder/releases/tag/v2025.6.2 so you don't have to revert back to an old firmware. Some smlight builds in the past were missing a config that...

> > [@koevoetsfjm](https://github.com/koevoetsfjm) try these just in case https://github.com/Nerivec/silabs-firmware-builder/releases/tag/v2025.6.2 so you don't have to revert back to an old firmware. Some smlight builds in the past were missing a config...