Ian R

Results 7 comments of Ian R

USB3 bus lockup when using CueRipper 2.1.5-7

I've now tried a number of different enclosures, and noen of them exhibit this same issue wit CueRipper - sadly the ones having the issue are the decent ones! I...

USB3 bus lockup when using CueRipper 2.1.5-7

I've run a bus analyser on a good enclosure and the Lindy enclosure to try and establish what's going on - images of bus traffic attached. interesting to note that...

USB3 bus lockup when using CueRipper 2.1.5-7

Hi Wolfgang Thank you for getting back to me. Please see the link below: USB 3.0 Enclosure 5.25" for BD/DVD/CD Drives - from LINDY UK  | | | | £...

USB3 bus lockup when using CueRipper 2.1.5-7

Sorry - I hadn't realised the link wouldn't populate correctly!

USB3 bus lockup when using CueRipper 2.1.5-7

@c72578 thanks for the links. I had seen the first article - but only just realised they are one and the same enclosure - the BYTECC one being significantly cheaper...

USB3 bus lockup when using CueRipper 2.1.5-7

Ahh ok I see what you mean!   So what is causing this problem with CueRipper that causes it to crash the bus when other ripping tools like EAC work without...

System.DllNotFoundException: Unable to load DLL 'PenIMC_cor3.dll' or one of its dependencies: The specified module could not be found. (0x8007007E)

Hi David It’s odd because I had about 15 of these errors, but everything completed and the logs confirm it. No it’s a desktop pc, only oddity is I was...