Igor Zavoychinskiy
Igor Zavoychinskiy
It's not that easy as it may look. The winch and connector are physical objects, linked with a PhysX joint. If I simply move the origin, then the connector at...
I'll better leave it here. One day a solution can be found.
Yes, the model is used to determine the volume. More specifically, the volume of the boundary box is used. Depending on the source of the part, the model can come...
The code calculates volume of _the boundary box_. Not the actual volume of the shape. If the linear dimensions are like you've mentioned (R=2.5m, H=7.5m), then the KIS volume should...
Good. You have been forgiven :)
Tried to attach the chute and got error: ``` 191206T215412.412 [ERROR] [RealChute.Libraries.TextureLibrary.TextureConfig.TryGetModel] [RealChute]: Could not find the ModelConfig at the index [-1] in the library 191206T215412.413 [ERROR] [RealChute.Libraries.TextureLibrary.TextureConfig.TryGetCanopy] [RealChute]: Could...
FYI @ChrisViral
KIS initiates parts in flight in a bit not right way. There are reasons for that and it cannot be easily fixed. Most parts are just fine with it, but...
As long as the problem persists, let's keep this issue open for the tracking sake. It would be really interesting and beneficial to see if it reproduces in v2. And...
There is a plan to support wearable items. However, they will likely be not compatible with what was done for KISv1.