Daniel Weber

Improve support for thermostats

2

Add support for: - [x] Virtual room operation panel: sends EEP A5-10-06, temperature channel should be linked with follow profile to another temp channel, setpoint channel is modifiable - [x]...

Currently almost all RPS devices are treated as Simple Push Buttons during auto discovery. This could be improved with a dedicated detection method for RPS EEP. * Analyse T21 and...

Implement retry-policy for missing answers

12

Discussion [here](https://community.openhab.org/t/new-openhab2-enocean-binding/39917/551?u=fruggy83) I will implement this

USB Auto discovery detects every FTDI device as an USB300 gateway

11

The USB dicovery just checks the vendor and product id => each FTDI device is detected as an USB300 gateway. The manufacturer should be added to this check.

Sometime thes Transceiver does not start up the first time. Whenever this occures the time between setting up the receiving thread and requesting the base Id is very short. Maybe...

Analyse exception on MSC messages

1

I am working on this.

I am working on this.

Update readme regarding the new TF-FGB device

3

Hi @dominikkv, kannst du vielleicht noch die readme zum Binding um ein paar Worte bzgl. TF-FGB erweitern? Vielen Dank im Voraus. Gruß Daniel

[enocean] Add support for pilot wire mode

12

Heating devices using EEP D2-01-0C can be controlled through a pilotwire mode. These commands should be therefore added to the EEP too.