Bernard
Bernard
i made a confusion between Hampi 1.0 and Hamradio Distribution v2.0. I realize that the last one is actually a former distro. This should be more explicitely explained on Groups.io...
What should I check in order to get DRAW activated ?
My test with Raspberry Pi 3 quadcore show that this message can occur when CPU is overloaded. See my ticket message about 100% CPU occupancy. This is related to the...
Hi, Is there any chance to get a built image for Windows OS of recent sources ? Bernard, f6bvp / ai7bg
I have the same issue with 2.3.115-0f3be version compiled from sources on a Linux Ubuntu system. For example new Galileo satellites are not added in local galileo.cat file and thus...
Same effect just clicking to activate AGC Disabled direct sampling mode [13:20:49 - 21/03/2024] (D) Set RTL-SDR frequency to 1544000000 [13:20:49 - 21/03/2024] (D) Set RTL-SDR Bias to 1 [13:20:49...
For info : Streaming displays is aroud 1.2 MB/s for a Samplefrate of 650 ksps on average.
> If the server is running on a Raspberry Pi this is likely a classic case of an inadequate power supply. Thanks but Satdump server is running on a Tower...
> Hello! It sounds like the underlying kernel driver is not detaching properly. Try blacklisting the kernel modules by adding the following lines to `/etc/modprobe.d/blacklist.conf`, then reboot the system running...
This may be also related to Celestrak URL change. If so, forget the issue report. By the way, could you add two references for 'new' Galileo satellites into galileo.cat ?...