Emerson Corder
Emerson Corder
Other than the IP, what else will need to be changed for this to work with multiple printers? I currently have 5 on Klipper I would like to be monitored...
Pico W
Have you tried this out with a Pico W? I honestly think this project would be great with a Pico W as the computing power of the Zero is total...
Raspberry Pi Zero 2 W (2) 16x32 Adafruit Matrix Panels Adafruit RGB Matrix Bonnet Raspbian Bullseye 32bit Lite Everything installed, no errors. Example: `sudo ./text-scroller -f ../fonts/9x18.bdf -B0,0,255 -O0,0,100 -C255,0,0...
Is it possible to add dump978 to this?
How do you enable 1-wire on the CB1, specifcally for the DS18B20 sensor. Currently I use them on 3 of my machines that have enclosures to keep an eye on...
It was claimed this was test and worked perfect with the Manta Boards and a CB1, yet on all three of my Manta set ups (M8P, M4P, Manata EZ) these...
The owners manuals provided give zero help on getting the built in canbus to work.
the usual reset + boot button method does NOT put the board in DFU mode, making it impossible to update firmware via STM32Programmer
Calls for a file in the code that isnt provided with the package... Its looking for FS.h Arduino: 1.8.19 (Windows 10), Board: "Arduino Uno" C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware...
So this has been the most frustrating thing i've ever worked with. This is the most reason release from github. If I enable MQTT i get a debug error, if...