Ran Bao comments

Results 8 comments of


                                            Ran Bao

Acceleration when synchronize toolhead and manual stepper

Thanks for the heads up. I tends to agree with your conclusion that the microcontrollers can't keep up. However I do observe the timer too close issue can be minimised...

FreeRTOS v11 support

Thanks for pointing this out @peterharperuk I'm testing the compatibility of FreeRTOS v11 with Picosdk right now and haven't found any issues so far.

picow_access_point example cannot be changed to other subnet

Hi @peterharperuk Thanks for your reply. I just updated the title and description for the issue. The cause was I changed the IP address for the host from 192.168.4.1 to...

picow_access_point example cannot be changed to other subnet

The new DHCP starts from packet 481. The 192.168.4.1 was offering the IP address while the pi has 192.168.3.1 IP address. In the end the 192.168.3.16 was assigned to the...

picow_access_point example cannot be changed to other subnet

@peterharperuk The only change I made was to change the subnet from 192.168.4.1 to 192.168.3.1. Only the AP mode is activated at the time of running the TCP server. Also...

picow_access_point example cannot be changed to other subnet

@peterharperuk I finally trace back to the source of the 192.168.4.1 https://github.com/georgerobotics/cyw43-driver/blob/9bfca61173a94432839cd39210f1d1afdf602c42/src/cyw43_lwip.c#L182 For which when DHCP sends the offer, it uses 192.168.4.1 as the source. Unfortuantely due to the lack...

picow_access_point example cannot be changed to other subnet

Thank you very much!