drom89
drom89
Hello, any news on this topic ? And all of them are 3,3V ?
This feature will be good for machine diagrams too. 
So im using ESP32 on board MKS DLC32 V2.1 And i want to use GPIO 0 and GPIO 4 for serial 2 communication, can i use it ? And what...
So i added MPG MODE ENABLED to mks_dlc32_2_0_map.h > #if MPG_MODE_ENABLE #define UART2_RX_PIN GPIO_NUM_4 #define MPG_ENABLE_PIN GPIO_NUM_0 #endif It compiles and i can flash firmware no problem I connected RX...
Hello, i have BTT SKR 1.4T with BTT TMC 2209. And cant get it working. For your question UART is working no problem with Marlin. But i dont know if...
So i boosted the planner buffer from 36 to 180. Im using lightburn and with synchronous transfer mode its still almost same. With buffered mode its ok but only like...
SKR 1.4 Turbo board. Tomorrow i will record video.
When trying to go with 200 buffer size i run our of memory. 
> > Tomorrow i will record video. > > I do not need one, I would rather have a file showing the symptoms so I have something to test with....
Ok thanks, i will test it tomorrow and send the files.