drom89
drom89
files are here: [gcode foto.zip](https://github.com/grblHAL/LPC176x/files/7654839/gcode.foto.zip)
> There was several pauses during the run, the job restarted by itself after a little while (a little less than 3 minutes). I didnt wait for the resume, so...
I have 80 steps per mm
To be honest i still didnt try it. I was busy with new version of mechanics. EDIT: i will try to test it next week and let you know the...
I have some troubles with TMC2130 overheating so im not sure if it is working as intended. So no results yet.
Hi again, im back with some new info. Switched back to TMC2209 and i get much better temperature.
So current situation when i try to engrave in black and white threshold mode in Lightburn. https://user-images.githubusercontent.com/5219063/156813970-b725f0a7-ecbc-4f25-b1e2-3ec48ffb91b9.mp4 gcode in zip file below speed 300mm/s GrblHAL 1.1f ['$' or '$HELP' for...
When i try graysacale image, gcode below.  https://user-images.githubusercontent.com/5219063/156815855-6ce2edaf-a524-4c37-b375-89ad5a99d5be.mp4 [cat_test.zip](https://github.com/grblHAL/LPC176x/files/8187912/cat_test.zip)
EDIT: videos above are with default BLOCK_BUFFER_SIZE Below i will upload with #define BLOCK_BUFFER_SIZE 150 Memory region Used Size Region Size %age Used MFlash512: 168304 B 496 KB 33.14% RamLoc32:...
Machine can take 1100mm/s on X Axis. On lower feedrates it looks almost same.