Arsen

For me helps gave to Prismatik screen capture permissions in macos settings

> Just use Russian language, it comes with it not all russians, huh? https://www.reuters.com/world/europe/russia-pounds-kyiv-with-missiles-ukraines-military-says-2024-09-02/

@vbaskoff did you fix your dongle? got similar issue with fd511gx, but wait for needle pad @Anime4000 what the way? reset dongle to factory defaults? @crrodriguez if you have 3d...

got same issue as @vbaskoff ``` /interface ethernet monitor sfp1 name: sfp1 status: no-link auto-negotiation: done advertising: link-partner-advertising: sfp-module-present: yes sfp-rx-loss: no eeprom-checksum: bad eeprom: 0000: 03 00 00 00...

@Anime4000 successfull

@Anime4000 not looks like it helps. same eeprom in mikrotik monitoring. ``` ... i2c set port 1 dev 0x50 reg 0x6A data 0x00 RTK.0> command:# diag i2c set port 1...

UPD: calculate and set VS_AUTH_KEY + switch LAN_SDS_MODE from 1 to 4 - didn't help check eeprom from `diag i2c get ...` - all is stored, but mikrotik interface still...

btw @Anime4000, this happened after [this](https://github.com/Anime4000/RTL960x/issues/312) issue switch firmware to second partition with [this](https://github.com/Anime4000/RTL960x/blob/main/Docs/fw_part.md#sw_commit0) guide- back to default dongle firmware and dongle back to work eeprom pretty same as before...