deHarro

Save/Restore Viewport rotates one time after saving

9

Hi Martin, just encountered another neat feature of OCP :) Set the viewport orientation to your liking. -> Move Viewport somewhat by Middle Mouse Key (Wheel) Save this setting. Restore...

Unpinning and/or moving and/or resizing some of the GUI elements

4

Hi Martin, someone (aubete?) rised this topic in the past, but you didn't comment on it, or I passed On my office PC I have no concerns with the arrangement...

Hi Francisco! I use some of those LOGO displays offered by Pollin here in germany as HB10401 (see https://www.pollin.de/p/lcd-modul-hb10401-4x10-121148). The application I use one of it is described on my...

measure distance of two points in the viewport, snap to coordinates

2

Hi Martin! Hope you are fine :) Sometimes I need a quick estimation for the distance of two points or lines displayed in the viewport of OCP. It would be...

button to place viewport centered flat

3

Hi Martin, I am used to look at my designs from above and centered. To get this done, I have to use the mouse, and since my mouse is somewhat...

superimpose more than one g-code file in the GUI

1

Hi Martin, I just had an extraordinaire idea (naturally triggered by an actual problem, or better a task...) Yesterday I finished a project in a hustle and therefore I had...

Please bring the warning message window to be on top of all other windows

3

Hi Martin, I use pcb-gcode.ulp as tool for generating gcode for routing boards. pcb-gcode.ulp generates tool change code which is not recognized by OPC. In turn OPC pops up a...

Milling board outline with rounded corners

5

Hi John, I tried to give rounded corners to my last design and used "miter" in Eagle to form the rounded corners. The design looks exactly as expected in Eagle:...

different depth for milling holes and circumference, respectively

1

Hi John, another point I stumbeled over when milling my current board is this: Milling the circumference of the board needs to be as deep as the boards material is...

If I place a wire around the board outline in the miling layer, the generated milling path is clockwise around the board, so the mill works climbing. As with etching,...