dalegaard
dalegaard
Hi! Currently gcode arcs aren't supported. I'll look into how difficult it would be to support. Best regards, Lasse
Added in #2c7b578, released as v3.2.0.
Hi @hesiod Are you still working on this? Best regards, Lasse
Hi @hesiod That's my bad, I hadn't considered you were looking for feedback at this stage. Sorry about that. I'm very interested in supporting this feature if it can be...
Hi @richfelker I'm not aware of how this works? Best regards, Lasse
Hi @richfelker Okay I think I understand. This shouldn't be too difficult to do, I'll take a look. I'm thinking of adding a scaled version of the current axis limiter...
Hey @richfelker I've taken a stab at this, please check the https://github.com/Annex-Engineering/klipper_estimator/tree/limited_kinematics branch. I currently have no working printer, so testing this is a bit annoying. Hopefully you and Piezo...
Just wanted to drop a note here for others with this problem: If your ASIO device reports a minimum latency of >10 ms, Portaudio(which is used by Jack in this...
Hi, I'm seeing much more stable temperatures in my machine with this patch. I run an 80W heater and a 24 CFM fan, and the upstream code was never able...
Hi @enjoy-digital Sounds great, let me know if you need me to do any changes. Best regards, Lasse