christopher-kwok
christopher-kwok
I am having the similar problem after upgraded to 2.7.0: > 2025-12-02 20:08:01] error: zh:ember:uart:ash: Received ERROR from adapter, with code=ERROR_EXCEEDED_MAXIMUM_ACK_TIMEOUT_COUNT. > [2025-12-02 20:08:01] error: zh:ember:uart:ash: ASH disconnected | Adapter...
*UPDATED* - Added debug log. - Added all Zigbee devices list.
@pbehrens99hh I have powered it off twice but the issue persists. May I know what Zigbee devices you are using? Wanted to find out if there is any in common.
Thanks @pbehrens99hh. I don't see any overlapping models. Will capture some more debug logs and do some analysis tonight.
That's exactly what I did. Powered it down. Unplugged everything, then after 10mins, put everything back, powered it on. Expected Result: It will fix everything 😂 Actual Result (and reality):...
Added today's debug log file above.
@Koenkk I don't have backup so I haven't downgraded to 2.6.3.
Upgraded to HA Core 2025.12.0. Powered off after the upgrade. Unplugged everything. Put everything back. Then powered it on. Z2M was running fine for 40mins then it crashed again.
@novaXire Just had the two S60ZBTPGs unplugged, Z2M was ok in the first few hours but in the end still crashed and restarted
@Nerivec installed Z2M Edge. It's running now. Any test I need to do for you?