Carlos Felicio

If you can integrate apprise, it will take care of pretty much of notification needs: https://github.com/caronc/apprise Example of a tool using it: https://github.com/dgtlmoon/changedetection.io

Looks like auto upload also stopped working on my android phone right after the 3.18 release (the date of the last uploaded picture coincides with the release of the version)....

@chippawah Palette works fine with Fluidd as long as you configure it on the klipper.cfg. I can still see the pings on the Palette itself, so this is just a...

I just tried to convert from 512 to 4096 with the latest Seachest Lite on Windows, and I end up with a corrupted disk / partition that can't be removed....

Ah, I think I found a clue. The disk is in GPT format, if I delete all the partitions and convert it back to MBR before running the command, it...

Thanks for your quick reply! It's a very bizarre situation. I purchased these disks back in 2021, and I did switch some of them to 4KN back then without any...

I'm still running 3.8.9.3 on Windows 11, but I noticed the color flickers sometimes, and also dispcalgui fails to re-apply the profile. I also use the same desktop with mpc-hc...

Umm, after reading it, I'm wondering if it's a bit too early to adopt this: 1 - Madvr / 3DLut will likely not work properly, although its likely possible to...

> > Any chance to support this format? > > Read the 1st post. Support in smartctl is still experimental. You're welcome to supply a patch if you don't want...

If anyone is still struggling, I was able to switch my Firecuda 530 to 4kn by using the Ubuntu nvme command with a live CD. Instructions here: https://carlosfelic.io/misc/how-to-switch-your-nvme-ssd-to-4kn-advanced-format/