Caerandir
Caerandir
Bug: Rectangles with rounded corners in SVG result in wrong vector toolpath for laser in Luban 4.1.3
# 🐞 bug report Luban seems to ignore rounded rectangle corners in a SVG when calculating the vector toolpath. The display of the imported SVG itself looks right, only the...
Hi aramk, with Wordpress 4.9.8 and Crayon active, I can no longer use rich text editor replys for comments. I can reply to a blog post, but selecting "reply" on...
When I run Auto-Z-Calibration on the DX head (I *like* this feature!!!), since Firmware 1.15.19 the result is that the print starts about 0.3 mm too high, which I then...
If I start the machine with dual extruder head installed, but only one hotend in place, the printer says "Anormal hotend - print head powered off". If I then go...
If I start the X/Y calibration wizard from the touchscreen, I have the option to choose "Load filament". If I do so, I get to the nozzle control page and...
If the GCode for a laser Job uses G91 (relative positioning), and that Job is paused via Touchscreen, after resuming the Job all laser lines are happening at the origin....
When printing the test model after the calibration (the cross where you check that all parts can be broken off), I noticed that the nozzle temperature is altered between 200,...
First of all: Thanks for providing tilemaker! Very cool piece of software! Is there a way to avoid that the same OSM object is processed twice because it matches more...