Brian Sune
Brian Sune
But Dave, you can see no matter how good the test equipment it gets it is still considered as offset 200 - 400 decimal at low side aka 200 /...
Hey Dave, I have a bit idea not sure you agree. What if FPGA 1 soft ADC is used to measure the noise of the system. Aka it is short...
It is interesting that my PSU noise is not really changed under ON/OFF But a offset on DC rail OFF  ON 
> Sorry for the pseudo tests, it was because I could reach max speed without both antennas in the previous setup. I changed places and here are the numbers on...
@wangwillian0 This is very interesting result. You do measure it one time one each side? What Band did you tested when the result is dropped? 5G or 2G or both...
@wangwillian0 See this page: https://www.olliw.eu/2020/wifibroadcast-openhd-dronebridge-5-ghz-wifi-cards/ Very interesting and I do see people mentioning switch hacks?
@wangwillian0 According to the link I enclosed I guess you are talking the left ant as the image ?  And the right ant as ?  If the above...
@wangwillian0 For the switch
@wangwillian0 Okay now I see the full picture. Back to the question, my experience tell me that if the chip itself do design a good MIMO such as 2T2R then...
@wangwillian0 Not the dBi if considering the antenna omnidirectional stuff too complex even myself not able to tells how it will be. In software should be RSSI and the TX...